Plaster 138-142 Technology Overview

IT Services Help Desk (864) 977-7272 Submit a Ticket

Note: This article applies to all Plaster classrooms except 201.

  • On the wall, there is an input controller for the display. The controls, starting with Power Off and going clockwise, are as follows:
    • Power off
    • Volume up
    • Hide projector display (does not power the system off)
    • Volume down
    • AirServer (for wireless connection)
    • White Board
    • HDMI
  • (NOTE: press the buttons next to the display, not the display itself)

  • Power on: select an input (HDMI, White Board, or AirServer).
  • Power off: select the OFF button.

To project with optional PC Interactivity (touch capabilities),

  • Power the system on via the HDMI button on the projection controller.
  • Connect your PC or Mac via HDMI and USB.
  • Make sure that the PC Interactivity toggle is ON on the projector display:

To project wirelessly,

  • Power the system on via the AirServer button on the projection controller.
  • On PC,
    • Press the Windows key and K at the same time.
    • Select the classroom name (i.e. Plaster 138) to project.
  • On Mac,
    • Open Control Center from the menu bar and select Screen Mirroring:
    • Select the classroom name (i.e. Plaster 138) to project.

To use the Digital White Board,

  • Power the system on via the White Board button on the projection controller.
  • Use your finger or the stylus to write or draw.

NOTES:

  • Do not use a dry-erase marker on the projection screen (middle board).
  • Room lights turn on with motion. There is a switch next to the door that you can control brightness.
  • Window blind controls are next to the windows. The top and bottom buttons raise and lower the blinds completely. The middle buttons let you control how high the blinds stop.
Print Article

Details

Article ID: 13746
Created
Thu 7/18/24 3:50 PM
Modified
Wed 8/28/24 2:27 PM